Skip to main content
Placeholder Image

Are RockLock™s compatible with other tooling?

gaslamp
May 4, 2021

Yes, pull studs can be machined directly into your existing fixturing. Sub-plates can be fabricated to adapt your existing tooling to the RockLock™ system.

Read More
Placeholder Image

What is the repeatability of your Self-Centering Vises?

gaslamp
May 4, 2021

The self-centering repeatability of the vise is less than 0.0005″ (0.0127 mm).

Read More
Placeholder Image

What is a soft / machinable jaw?

gaslamp
May 4, 2021

‘Soft jaws’ (in steel or aluminum) are machinable, meant to be cut to the profile of the workpiece for secondary operations.

Read More
Placeholder Image

What is the hardness of the standard Master Jaw?

gaslamp
May 4, 2021

The hardness of the jaw is 55 HRC.

Read More
Placeholder Image

What is a Master Jaw?

gaslamp
May 4, 2021

A ‘Master Jaw’ or ‘Hard Jaw’ is the hardened steel jaw with the dovetail and serrated teeth that comes standard with our vises.

Read More
Placeholder Image

What is the hardness of the vise body?

gaslamp
May 4, 2021

The hardness of the vise body is 40 HRC.

Read More
Placeholder Image

What is the dovetail angle of 5th Axis products?

gaslamp
May 4, 2021

All 5th Axis products utilize a 45 degree dovetail. We also offer picatinny fixtures in the Dovetail Fixture product section.

Read More
Placeholder Image

What is a Dovetail Fixture?

gaslamp
May 4, 2021

A dovetail fixture holds the stock with dovetail cuts. Our dovetail fixtures have a very small profile, which allows more accessibility to the stock material. All of 5th Axis dovetail angles are 45 degree, and there is dovetail stock prep document for each fixture.

Read More
Placeholder Image

What is a Poka Yoke?

gaslamp
May 4, 2021

Poka Yoke is a Japanese term for mistake-proof. We offer Poka Yoke pull studs to prevent operators from misloading vises and fixtures.

Read More
Placeholder Image

What is considered ‘Top Tooling?’

gaslamp
May 4, 2021

Top tooling generally includes anything that mounts to the RockLock™ system. If it includes pull studs, it’s top tooling. We offer a variety of top tooling setups, ranging from self-centering vises to multi-fixture pyramids and more in the Products section.

Read More
Placeholder Image

What is a Master Alignment Pallet?

gaslamp
May 4, 2021

The master alignment pallet is used to align the center bore and the axial positions of the RockLock™ plates.

Read More
Placeholder Image

What is the repeatability of a RockLock™?

gaslamp
May 4, 2021

The repeatability of RockLock™ is less than 0.0003″ (0.00762 mm)

Read More
Placeholder Image

What is a Collet Fixture?

gaslamp
May 4, 2021

The R96-CER40 fixture allows secure holding of round parts with RockLock™ system.

Read More
Placeholder Image

What is the RockLock™ system?

gaslamp
May 4, 2021

RockLock™ is a patented 4 pull stud system that mechanically locks vises, fixtures, tooling, etc and allows for quick and accurate change over. 5th Axis RockLock™ fixtures utilize the industry standard 96mm/52mm pull stud spacing. This ensures 100% compatibility with Lang, Jergens, Gerardi, Schunk and Gressel 4 pull stud systems. The RockLock™ quick-change system can […]

Read More